The key points of the design of the bending die for the Hohhottra Bend Factory!

2019-06-20 16:57:56

  The basic principle of the general tensile bending die of Hohhot Trad Factory is to use a variety of small-sized standard components - modules, arranged in a reasonable shape according to the required mold. After bending a batch of parts, you can quickly change it for use. When designing the module, it should be noted that the working radius should not be too small to avoid wrinkles; the width should not be too large, the versatility can be larger; the fixing is reliable and rapid.

  1. The cross-sectional shape of the bending die

  2, the length of the bending die

  3, typical structure mold and strength

  4, the location of the positioning hole

  5, safety device